WKP-1
Connections
Connections Board of the WKP-1.
FIGURE 7.
NOTE:
The numbered descriptions correlate with the numbers in the Figure 7.
GPI Relay Contact 4-pin Terminal (J500)
1.
Local or Remote Power Switch (SW100)
2.
Local Power 3-pin Terminal (J100)
3.
RJ-45/CAT-5 Connection (J300)
4.
RJ-12 Connection (J400)
5.
8-pin Terminal (J200)
6.
NOTE:
If you are providing your WKP-1 keypanel with remote power, use the WKP-1 BOP (see Figure 10 on page 25).
Installation 17