Download Print this page

Intuicom RTK Bridge-X Installation Manual page 10

For the john deere starfire 3000

Hide thumbs Also See for RTK Bridge-X:

Section 4: Configuration

The StarFire™ 3000 must be configured to receive at 38,400 baud rate (set baud rate), 8 data

bits, no parity, and 1 stop bit. The correction type must match the correction type being

received in the RTK Bridge-X (typically RTCM). See the StarFire™ 3000 Installation guide

for details on configuring the receiver.

Version 1.4

Need help?

Do you have a question about the RTK Bridge-X and is the answer not in the manual?