Decorative Barrier Front Dimensions For Finishing - Majestic JADE32IN-B Installation Manual

D. Decorative Barrier Front Dimensions for
Finishing
WARNING! Risk of Fire! A decorative barrier front is re-
quired for this model. DO NOT operate this appliance
without a decorative barrier front in place.
Only decorative barrier fronts certified for use with this ap-
pliance model may be used. Contact your dealer for a list
of decorative barrier fronts that may be used.
Only decorative barrier fronts certified for use with this
appliance model may be used. Contact your dealer for
a list of decorative barrier fronts that may be used. Once
you have determined what kind of decorative barrier front
and finishing material is going to be used on the fireplace,
you may use the table below which shows the decorative
barrier front models and the finishing material thickness
allowed. For an inside fit there is an available template to
assist with sizing the finishing material.
Overlap Fit - CFTF and PFF Decorative Barrier
Fronts
(0 Inches to 1 Inch Thick Finishing Material)
Both the CFTF and PFF decorative barrier fronts are de-
signed to overlap finish materials 0 inches to 1 inch thick.
See Figure 10.9 and Figure 10.10.
NOTICE: This one inch maximum not only includes the
decorative finish materials (marble, tile, slate, etc) but
also the mortar or adhesive used to attach the decorative
finish material.
The non-combustible finish material can be installed up to
the fireplace opening.
FRONT FACE OF FIREPLACE
DECORATIVE FRONT
Finishing materials 1 inch maximum thick.
Stop finishing material flush with opening.
Figure 10.9 Overlap Fit Decorative Barrier Front
(CFTF and PFF Decorative Barrier Fronts)
Majestic • JADE32IN-B, JADE42IN-B, JADE42IL-B Installation Manual • 2619-986 Rev. B • 10/19
1 IN. MAX.
FINISHING MATERIAL
(TOP EDGE)
DRYWALL OR
EQUIVALENT (1/2 IN.)
Figure 10.10 Overlap Fit Method
(CFTF and PFF Decorative Barrier Fronts)
FACTORY-INSTALLED
NON-COMBUSTIBLE BOARD
NON-COMBUSTIBLE
FINISHING MATERIAL
0 - 1 IN. THICK
CFTF
DECORATIVE
FRONT SHOWN
NON-COMBUSTIBLE
FINISHING MATERIAL
0 - 1 IN. THICK
63