Majestic JADE32IN-B Installation Manual page 31

Top Vent - Vertical Termination - (continued)
Exhaust Restrictor Instructions
Exhaust restrictors are recommended for these verti-
cally terminated products which have excessive draft.
Exhaust restrictors will compensate for high draft, and
restore visual flame height. If the vent configuration has
a total vertical of 15-60 feet, an exhaust restrictor may
be needed. The exhaust restrictor can be located in the
appliance manual bag.
Exhaust Restrictor Installation
1. JADE42IN-B/JAD42IL-B Only: Remove inner heat
shield by removing two wing nuts from top front of heat
shield and two screws that secure the heat shield to
back wall of fireplace. Retain heat shield and fasten-
ers.
2. BOTH SIZES: Center the exhaust restrictor in the
open end of the exhaust outlet and secure through
the slots on the exhaust restrictor with the two 1/4 in.
self-tapping screws provided in the appliance manual
bag. See Figure 4.17.
3. JADE42IN-B/JADE42IL-B Only: Reinstall shield by
securing it with the two wing nuts and two screws pre-
viously removed in Step 1.
Majestic • JADE32IN-B, JADE42IN-B, JADE42IL-B Installation Manual • 2619-986 Rev. B • 10/19
SCREWS
HEAT SHIELD
EXHAUST RESTRICTOR
INSTALLED SCREWS
Figure 4.17 Installing Restrictor
WING NUTS
31