6
Appliance Preparation
A. Vent Collar Preparation
CAUTION! Risk of Cuts, Abrasions or Flying Debris.
Wear protective gloves and safety glasses during instal-
lation. Sheet metal edges are sharp.
Top Vent
WARNING! Risk of Fire! Do not remove heat shield.
Elevated header temperatures may cause a fire.
JADE42IN-B / JADE42IL-B
1. Remove two screws and discard. See Figure 6.1.
2. Fold up top heat shield to 90 degrees as shown in
Figure 6.2.
REMOVE SCREWS
Figure 6.1 JADE42IN-B / JADE42IL-B - Shipping Position
HEAT MANAGEMENT
KNOCKOUT LOCATIONS
Figure 6.2 JADE42IN-B / JADE42IL-B
- Top Heat Shield in Position
Majestic • JADE32IN-B, JADE42IN-B, JADE42IL-B Installation Manual • 2619-986 Rev. B • 10/19
TOP HEAT SHIELD
IN POSITION
JADE32IN-B
1. Remove two screws to remove shipping support.
Discard shipping support. See Figure 6.3.
2. Remove and discard seal cap. See Figure 6.4.
REMOVE 2 SCREWS
Figure 6.3 JADE32IN-B - Shipping Support in Shipping Position
Figure 6.4 JADE32IN-B
- Shipping Support and Seal Cap Removed
39