Table of Contents
Advertisement
E. Hearth Extension
A hearth extension is not required with these models.
Refer to Section 3 for clearances and information
regarding vinyl flooring restrictions.
Majestic • MER36MN, MER42MN Installation Manual • 2599-980 Rev. B • 5/23
F. Decorative Barrier Front Dimensions for
Finishing
Only decorative barrier fronts certified for use with this ap-
pliance model may be used. Contact your dealer for a list
of decorative barrier fronts that may be used.
Decorative Barrier Front Fit Types
• Inside Fit as shown in Figure 10.12. Decorative barrier
front fits inside appliance opening.
• Overlap fit as shown in Figure 10.13. Decorative bar-
rier front is installed on top of finishing material.
NON-COMBUSTIBLE
FINISHING MATERIAL
6 IN. MAXIMUM
THICKNESS
DECORATIVE BARRIER FRONT
Non-Combustible Finishing material between 1 and 6 in. thick.
Figure 10.11 Inside Fit Decorative Barrier Front
FRONT FACE OF FIREPLACE
DECORATIVE BARRIER FRONT
Finishing materials 1 in. maximum thick.
Stop finishing material flush with opening.
Figure 10.12 Overlap Fit Decorative Barrier Front
Decorative Barrier Front Finishing Methods
1. Finish material installed up to appliance opening.
A. Finish material 1 inch thick or less: Use with Over-
lap fit fronts. Finishing strips not required. See Figure
10.13.
B. Finish material 0-6 inch thick: Use this method with
Inside fit fronts. Finishing strips not required. See Fig-
ure 10.14.
2. Finishing strips required. Shipped with appliance. See
Figure 10.16.
A. Finish material 1-6 inch thick: Use this method with
overlap fronts installed as inside fit. See Figure 10.15.
A table showing the fit option (Overlap or Inside) for each
available decorative barrier front for this appliance is in-
cluded for each finishing method (1.A, 1.B, 2.A).
NON-COMBUSTIBLE
FINISHING MATERIAL
6 IN. MAXIMUM
THICKNESS
1 in. MAX
NON-COMBUSTIBLE
FINISHING MATERIAL
(TOP EDGE)
63
Advertisement
Table of Contents
