Getting Prepared - Keysight N5232A Option 200 Installation Note

Getting Prepared

The PNA contains extremely sensitive components that can be ruined if mishandled. Follow
CAUTION
instructions carefully when making cable connections, especially wire harness connections.
The person performing the work accepts responsibility for the full cost of the repair or
replacement of damaged components.
To successfully install this upgrade kit, you will need the following:
• A license key - refer to
• A PDF copy or a paper copy of the PNA Service Guide - refer to
Guide" below.
• An ESD-safe work area - refer to
• Correct tools - refer to
• Enough time - refer to
• Test equipment for the post-upgrade adjustments and full instrument calibration. To view the equipment
list, click the Chapter 3 bookmark "Tests and Adjustments" in the PDF Service Guide
License Key Redemption
The enclosed Option Entitlement Certificate is a receipt, verifying that you have purchased a
NOTE
licensed option for the PNA of your choice. You must now use a Keysight Web page to request
a license key for the instrument that will receive the option.
To enable the option product, you must request a license key from:
softwarelicense. To complete the request, you will need to gather the following information:
• From the certificate
❏ Order number
❏ Certificate number
• From your instrument
❏ Model number
❏ Serial number
❏ Host ID
The instrument information is available on the network analyzer – on the analyzer's Help menu, click About
Network Analyzer.
If you provide an email address, Keysight will promptly email your license key. Otherwise, you will your receive
your license key via postal mail.
1. See "Downloading the Online PNA Service Guide" on page
4
"License Key Redemption"
"Protecting Your Workspace from Electrostatic Discharge"
"Tools Required for the Installation" on page
"About Installing the Upgrade" on page
below.
"Downloading the Online PNA Service
6.
6.
http://www.keysight.com/find/
5.
below.
1
.
Installation Note N5232-90101