Getting Assistance From Keysight; Contacting Keysight - Keysight N5232A Option 200 Installation Note

Description of the Upgrade
This upgrade adds the following items to your N5231A Option 200, N5232A Option 200, or N5239A Option 200
network analyzer:
• 60 dB source step attenuators with brackets and wire harnesses
• front panel jumpers
• cable guards for front panel jumpers
• front panel overlay replacement
• new cables
After installation of this upgrade, your analyzer will be an N5231A Option 216, N5232A Option 216, or N5239A
Option 216.

Getting Assistance from Keysight

By internet or phone, get assistance with all your test and measurement needs.

Contacting Keysight

Assistance with test and measurements needs and information on finding a local Keysight office are available
on the Web at:
http://www.keysight.com/find/assist
If you do not have access to the Internet, please contact your Keysight field engineer.
In any correspondence or telephone conversation, refer to the Keysight product by its model
NOTE
number and full serial number. With this information, the Keysight representative can
determine whether your product is still within its warranty period.
If You Have Problems With the Upgrade Kit Contents
Keysight stands behind the quality of the upgrade kit contents. If you have problems with any item in the kit,
email Keysight Component Test Division (CTD) Support at support_ctd-soco@keysight.com, or telephone the
CTD Hotline at (707) 577-6802 and leave a voice mail message. Please include details of the problem.
Installation Note N5232-90101 3