(Hex Ascii); Purpose Code (Dc1) - Star Micronics NX-15 User Manual

174
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
Sets immediate print mode.
(ESC)
6C.>9
1
27 1;5 1
IB 69 01
This command selects the immediate
print mode. In the immediate print mode
the print head prints one character at a
time, as you send it. The printer also
moves the paper up so that you can see
the current line and then down to con-
tinue printing. This kind of instant feed-
back can be especially helpful in telecom-
munications.
NOTE:
The character "l" (decimal code
49, hexadecimal code 31) can be used
instead of ASCII 1.
Chapter 6
Cancels immediate print mode.
(ESC)
66.99
0
27 1;5
o
IB 69 00
This command cancels the immediate
print mode and returns the normal print
mode.
NOTE: The character "O"(decimal code
48, hexadecimal code 30) can be used
instead of ASCII O.
Chapter 6