Code (Esc) "\" Nl N2; (Esc) Nl; (Decimal Ascii) - Star Micronics NX-15 User Manual

161
DOT GRAPHICS COMMANDS
PURPOSE Prints normal-density graphics.
CODE
(ESC) "K" nl n2 ml m2 .....
(decimal ASCII)
27 7.5 nl n2 ml m2 .....
(hex ASCII)
IB 4B
nl n2 ml m2 .....
REMARKS This command selects 60 dots-per-inch,
column-scan, bit-image graphics mode.
The values of nl and n2 represent the
number of graphics characters to be
printed, where the total number of
characters = n2 times 256 + nl. The
correct number of graphics data bytes
(ml, m2,
etc.)
must follow n2. The
ASCII values of these bytes determine
which pins are fired for each character.
SEE
Chapter 7
PURPOSE Prints double-density graphics.
CODE
(ESC) "L"
nl n2 ml m2 .....
(decimal ASCII)
27 76
nl n2 ml m2 .....
(hex ASCII)
IB
4C nl n2 ml m2 .....
REMARKS This command selects 120 dots-per-inch,
column-scan, bit-image graphics mode.
The values of nl and n2 are the same as
in normal-density graphics. The correct
number of graphics data bytes (ml, m2,
etc.) must follow n2. The ASCII values
of these bytes determine which pins are
fired for each character.
SEE
Chapter 7