Note: The Character "L; 49, Hexadecimal Code 31) Can Be Used; Instead Of Ascii 1 - Star Micronics NX-15 User Manual

140
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
RENfARKS
SEE
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
Sets the printer to expanded print.
(ESC) "w"
1
27 87 1
IB 57 01
This command causes characters to be
printed twice as wide as normal (half the
current pitch) until expanded printing is
cancelled.
NOTE: The character "l" (decimal code
49, hexadecimal code 31) can be used
instead of ASCII 1.
Chapter 4
Cancels expanded print.
(ESC)
"w" o
27 87
0
IB 57 00
This command resets the character pitch
to what it was before expanded printing
was set.
NOTE: The character "O"(decimal code
48, hexadecimal code 30) can be used
instead of ASCII O.
Chapter 4
Sets the printer to expanded print
for the remainder of the current
line.
(so)
14
OE
This command causes characters to be
printed twice as wide as normally until a
carriage return is sent. It can also be
cancelled with (DC4).
Chapter 4