See Chapter - Star Micronics NX-15 User Manual

145
CONTROLLING THE VERTICAL PRINT POSITION
These commands are used to move the paper relative to the
print head. By moving the paper up or down, the print head, in
effect, moves the opposite direction (down or up) on the page.
Line feed and reverse line feed
PURPOSE Advances
feed).
CODE
(LF)
(decimal ASCII) 10
(hex ASCII) OA
controls
the paper one line (line
SEE
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
REMARKS The actual distance advanced of the line
feed is set through various codes (see
below). When the DIP switch 1-8 is off,
a line feed is automatically generated
whenever the printer receives a carriage
return.
Chapter 5
Reverses the paper one line .
(ESC) (LF)
27 10
IB OA
This command causes the printer to
reverse the paper (in effect moving the
print head upon the sheet) one line. The
actual distance travelled is set through
various codes (see below).
You cannot reverse the paper more than
one inch when the optional automatic
sheet feeder is installed.
Chapter 5