Star Micronics NX-15 User Manual page 147

I
139
PURPOSE Sets the printer to proportional
print.
CODE
(ESC) " " 1
(decimal ASCII)
27
1;2
1
(hex ASCII) IB 70 01
REMARKS
This command causes all subsequent
characters to be printed with propor-
tional spacing until proportional printing
is cancelled. This command is ignored
when the "Print Pitch Panel" mode is
selected at power-on.
NOTE: The character "l" (decimal code
49, hexadecimal code 31) can be used
instead of ASCII 1.
SEE Chapter 4
PURPOSE
Cancels proportional print.
CODE (ESC) " " O
(decimal ASCII)
27
1:2
o
(hex ASCII) IB 70 00
REMARKS This command cancels proportional
printing and returns to "fixed pitch"
printing. This command is ignored when
the "Print Pitch Panel" mode is selected
SEE Chapter 4
at power-on.
NOTE: The character "O"(decimal code
48, hexadecimal code 30) can be used
instead of ASCII O.