Star Micronics NX-15 User Manual page 177

SEE
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
PURPOSE
169
PURPOSE Sets printer off line.
CODE
<DC3)
(decimal ASCII)
19
(hex ASCII)
13
REMARKS
This command causes the printer to go
off line, disregarding all subsequent
characters and function codes, with the
exception of (DC1 ), which will return
the printer to the on line state. This is
not the same as pushing the On Line key.
When the On Line indicator is not lit the
printer will not respond to (DC1).
Chapter 6
Sets printer on line.
(DC1)
17
11
This command resets the printer to the
on line state, allowing it to receive and
process all subsequent characters and
function codes. This is not the same as
pushing the On Line key. When the On
Line indicator is not lit, the printer will
not respond to (DC1).
Chapter 6
Sounds the printer bell.
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
(BEL)
7
07
This command
sound for about
Chapter 6
causes the buzzer to
a quarter of a second.