(Decimal Ascii) - Star Micronics NX-15 User Manual

173
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
PURPOSE
tiODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
Cancels the expansion of printable
area.
(ESC)
"7"
27
55
IB 37
This command cancels the expansion of
the printable character area and restores
the high-order control code area when
the DIP switch 2-5 is set on.
Chapter 6
Prints characters in the undefined
control code area.
(ESC) "I"
1
27 73
1
IB 49 01
This command causes the printer to
print characters in the undefined control
code area.
NOTE: The character "l" (decimal code
49, hexadecimal code 31) can be used
instead of ASCII 1.
Chapter 6
Selects undefined codes as control
codes.
(ESC) "I" O
27 73
0
IB 49
00
This command cancels to print the
characters in the undefined control codes
and restores them as the control codes.
NOTE: The character "O"(decimal code
48, hexadecimal code 30) can be used
instead of ASCII O.
Chapter 6