Other Printer Control Commands - Star Micronics Multi-Font LC-IOII User Manual

OTHER PRINTER CONTROL COMMANDS
Set MS6 to 1
Mode ASCII
Decimal Hexadecimal
Both <ESC>
" > "
27 62 1B 3E
Sets
the most significant bit of each subsequent byte received to 1, allowing
users with a 7-bit interface to access characters with ASCII codes greater
than 127.
-
Set MSB to 0
Mode
ASCII
Decimal
Hexadecimal
1
Std. <ESC> "="
27 61 1B 3D
-.
IBM <FS> "c" 28 61 1C 3D
Sets the most significant bit of each subsequent byte received to 0.
-
Accept MSB as is
Mode ASCII
Decimal
Hexadecimal
Both <ESC>
"#"
21 35 1B 23
Cancels the preceding commands and accepts the most significant bit as
it is sent to the printer.
Delete last character sent
Mode
ASCII
Decimal
Hexadecimal
Both
<DEL>
127 IF
Deletes the last character received. Ignored if the last character received
has already been printed, or if the last character received was all or part
of a command.
Cancel last line
Mode ASCII
Decimal Hexadecimal
Both
<CAN>
24
18
Deletes the last line currently present in the print buffer.
86