Star Micronics Multi-Font LC-IOII User Manual page 72

Select IBM character set
Mode ASCII Decimal Hexadecimal
< ESC > "t"
"1" 27 116 49
1B
14 31
Std.
< ESC > "t"
<l> 27 116
1
1B 74 01
Selects an IBM character set (character set #2 unless an < ESC > "7"
command has been received). Ignored in IBM mode, since the IBM
character set is selected automatically.
Select IBM character set #7
Mode
ASCII Decimal Hexadecimal
Both <ESC> "7" 27 55 1B 37
-.
Selects IBM character set #l. If the standard character set is currently
selected, this command remains dormant and takes effect at the next
< ESC > "t" 1 command. In IBM mode, character set #l is the power-up
default if DIP switch l-7 is OFF.
Select IBM character set #2
Mode ASCII
Decimal Hexadecimal
Both
<ESC> "6"
27 54
1B 36
Selects IBM character set #2. If the standard character set is currently
selected, this command remains dormant and takes effect at the next
< ESC > "t" 1 command, In IBM mode, character set #2 is the power-up
default if DIP switch l-7 is ON.
Select international character set
Mode ASCII
Decimal Hexadecimal
Std. <ESC> "R" n 27 82
n
1B 52 n
IBM
<FS> "R" n
28 82
n
1C 52 n
Selects an
international character set according to the value of n.
n Character set n Character set
0 U.S.A
7 Spain I
1 France
8 Japan
2 Germany 9 Norway
3 England 10 Denmark II
4 Denmark I
11 Spain II
5 Sweden
12 Latin America
6 Italy 13 Denmark/Norway
64