Other Printer Control Commands - Star Micronics LC24-15 User Manual

I
OTHER PRINTER CONTROL COMMANDS
Set MSB to I
Mode ASCII
Decimal Hexadecimal
Both <ES& ">"
27 62
1B 3E
Sets the most significant bit of each subsequent byte received to 1,
allowing users with a 7-bit interface to access characters with ASCII
codes greater than 127.
Set MSB to 0
Mode ASCII
Decimal Hexadecimal
Std. <ESC> "="
27 61
16 3D
IBM <FS> ',=V
26 61
1C 3D
Sets the most significant bit of each subsequent byte received to 0.
Accept MSB as is
Mode 1 ASCII Decimal
Hexadecimal
Both 1 <ESC> 'W'
27 35
1B 23
Cancels the preceding commands and accepts the most significant
bit as it is sent to the printer.
Delete last character sent
Mode ASCII
Decimal Hexadecimal
Std.
<DEL>
127 7F
Deletes the last character received. Ignored if the last character
received, has already been printed, or if the last character received
was all or part of a command.
Cancel last line
Mode ASCII
Decimal
Hexadecimal
Both <CAN>
24
10
Deletes the last line currently present in the print buffer.