Star Micronics Multi-Font LC-IOII User Manual page 79

Set line spacing to 7172 inch
Mode
ASCII
Decimal Hexadecimal
Both
<ESC> "1"
27 49 1B 31
Sets the distance the paper advances or reverses in subsequent line feeds
to 7172 inch.
Set line spacing to l/6 inch
Mode ASCII
Decimal Hexadecimal
Std. <ESC> "2" 27 50
IB 32
Sets the distance the paper advances or reverses in subsequent line feeds
to l/6 inch.
Set line spacing to n/216 inch
Mode 1
ASCII
Decimal Hexadecimal
Both I < ESC > "3" n 127 51 n
IlB 33 n I
Sets the distance the paper advances or reverses in subsequent line feeds
to n/216 inch, where n is between 0 and 255. If n = 0, in Standard mode
the line-feed distance is set to 0, but in IBM mode this command is ignored.
Set line spacing to
n/72
inch
Mode ASCII Decimal Hexadecimal
Both <ESC> "A" n 27 65 n
1B 41
n
In Standard mode, sets the distance the paper advances or reverses in
subsequent line feeds to n/72 inch, where n is between 0 and 85. If n
=O, the line spacing is set to 0.
In IBM mode this command does the same except that (1) the new line
spacing does not take effect until the next < ESC > "2" command, and
(2) if n = 0, the < ESC > "A" command is ignored.
Execute < ESC> "A"
Mode ASCII Decimal
Hexadecimal
IBM
< ESC >
"2"
27 50 1B 32
Sets the line spacing to the value defined by the last preceding < ESC >
"A" command. Sets the line spacing to l/6 inch if there is no preceding
< ESC > "A" command.
71