Star Micronics Multi-Font LC-IOII User Manual page 73

The first eight of these character sets (from U.S.A. to Spain I) can be
selected as power-up defaults by DIP switches 2-2 to 2-4.
Enable printing of a// character codes
Mode ASCII
Decimal Hexadecimal
IBM
<ESC> "\"
nl n2
27 92
nl n2
IB 5C
nl n2
Enables printing of all characters in the IBM character set, including those
assigned to character codes which are normally considered control codes.
This command remains in effect for the next nl + n2 x 256 characters,
where nl and n2 are numbers between 0 and 255. During this interval
no control functions are executed. If a code with no assigned character
is received, the printer prints a space.
Enable printing of a// character codes on next character
Mode ASCII
Decimal Hexadecimal
IBM
<ESC> 'LA"
21 94
1B 5E
This command operates like < ESC > "\" except that it remains in effect
for only one character.
Select slash zero
IModel ASCII I
Decimal
I
Hexadecimal I
<ESC> " -" "1" 27 126
49 IB 7E 31
Both
<ESC> " Y " < 1 > 27 126
1 IB 7E 01
Causes subsequent zero characters to be overprinted with a slash (0).
Select normal zero
Mode ASCII
Decimal Hexadecimal
cESC> " N " "0"
27 126
48 1B 7E 30
Both
<ESC> "W" < 0 > 27 126 0 1B 7E 00
Causes subsequent zero characters to be printed normally (0), without
a slash.