Star Micronics Multi-Font LC-IOII User Manual page 87

Cancels all current horizontal tab stops and sets new tab stops every n
columns, where n is between 1 and 127.
Reset a// tab stops
Mode ASCII Decimal Hexadecimal
IBM <ESC> "R"
21 82
1B 52
Resets the horizontal tab stops to their power-up values in which a tab
stop is set every 8 column starting at column 9. Also clears all vertical
tab stops.
Horizontal tab
Mode ASCII Decimal Hexadecimal
Both <HT>
9 09
Moves the print position to the next horizontal tab stop. Ignored if there
is no next horizontal tab stop in the current line. Note that when un-
derlining is selected, spaces skipped by horizontal tabulation are not
underlired.
Relative horizontal tab
Mode ASCII
Decimal
Hexadecimal
Std.
< ESC > "\" nl
n2
21 92 nl n2
IB SC
nl n2
IBM
< FS > "\"
nl n2 28 92 nl n2 IC SC nl n2
Moves the print position right or left a specified distance (maximum 6
inches). Ignored if the resulting position is beyond the right or left margin.
The formulas for the distance and direction are as follows:
If n2 is between 0 and 63, the print head moves right by (nl + n2 x 256)/120
inches
If n2 is between 64 and 127, the print head moves left by (nl +
[n2 - 641 x 256)/ 120 inches
Absolute horizontal tab in
inches
Mode ASCII Decimal Hexadecimal
Both <ESC> '3"
nl n2 21 36 nl n2
IB 24
nl n2
Sets the next print position to (nl + n2 x 256)/60 inches from the left
margin on the current line. Ignored if this position is beyond the right
margin. The maximum position is 8 inches.
79