Energy Saving; Adjust Time; Auto-Start; Auto-Off (Standby) - V-ZUG 74A Instructions Manual

Alternatively, hold the P / ESC button (B7) down for 10 seconds.
The languages scroll through.
Hold the OK button (B4) down for 5 seconds to confirm. The ap-
pliance goes off.

Energy Saving

Use this function to enable or disable Energy Saving.
When enabled, the function reduces energy consumption in
compliance with European regulations.
To enable or disable the function, proceed as follows:
1. Press the P / ESC button (B7) to enter the settings menu.
2. Press the ▽ and △ buttons (B5 and B6) until "ENERGY
SAVING" is displayed;
3. Press the OK button (B4). "DISABLE?" is displayed (or "ENA-
BLE?" if the function has already been disabled).
4. Press the OK button (B4) to enable or disable the function
or the P / ESC button (B7) to exit the menu.
Please note: A few seconds may elapse between
"ENERGY SAVING ENABLED" mode and delivery of the first
drink; "PREPARATION UNDERWAY" is displayed.

Adjust time

To adjust the time on the display, proceed as follows:
1. Press the P / ESC button (B7) to enter the settings menu.
2. Press the ▽ and △ buttons (B5 and B6) until "ADJUST
TIME" is displayed;
3. Press the OK button (B4). The hours flash on the display;
4. Press the ▽ and △ buttons (B5 and B6) to change the
hours;
5. Press the OK button (B4) to confirm. The minutes flash on
the display;
6. Press the ▽ and △ buttons (B5 and B6) to change the
minutes;
7. Press the OK button (B4) to confirm;
8. Press the P / ESC button (B7) to exit the settings menu.

Auto-start

You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coffee immediately.
Please note:
To enable this function, the time must be set correctly.
To enable Auto-on, proceed as follows:
1. Press the P / ESC button (B7) to enter the settings menu.
2. Press the ▽ and △ buttons (B5 and B6) until "AUTO-
START" is displayed;
3. Press the OK button (B4). "ENABLE?" is displayed;
4. Press the OK button (B4). The hours flash on the display;
5. Press the ▽ and △ buttons (B5 and B6) to choose the
hours;
6. Press the OK button (B4) to confirm. The minutes flash on
the display;
7. Press the ▽ and △ buttons (B5 and B6) to change the
minutes;
8. Press the OK button (B4) to confirm. "ENABLED" appears
under "AUTO-START".
9. Press the P/ ESC button (B7) to exit the menu.
To disable the function:
1. Press the P / ESC button (B7) to enter the settings menu.
2. Press the ▽ and △ buttons (B5 and B6) until "AUTO-
START" is displayed;
3. Press the OK button (B4). "DISABLE?" is displayed;
4. Press the OK button (B4) to confirm;
5. Press the P/ ESC button (B7) to exit the menu. "DISABLED" is
displayed.

Auto-off (Standby)

The appliance is set by default to go off if not used for two
hours.
The time can be changed so that the appliance switches off after
15 or 30 minutes, or after 1, 2 or 3 hours.
To re-programme Auto-off, proceed as follows:
1. Press the P / ESC button (B7) to enter the settings menu.
2. Press the ▽ and △ buttons (B5 and B6) until "AUTO-OFF"
is displayed;
3. Press the OK button (B4);
4. Press the ▽ and △ buttons (B5 and B6) until the required
time (15 or 30 minutes, or 1, 2 or 3 hours) is displayed;
5. Press the OK button (B4) to confirm;
6. Press the P/ ESC button (B7) to exit the menu.
Auto-off is programmed.

Setting the temperature

To modify the temperature of the water used to make the coffee,
proceed as follows:
1. Press the P / ESC button (B7) to enter the settings menu.
2. Press the ▽ and △ buttons (B5 and B6) until "SET TEMPE-
RATURE" is displayed;
3. Press the OK button (B4);
4. Press the ▽ and △ buttons (B5 and B6) until the required
temperature is displayed (l = low, llll = high);
5. Press the OK button (B4) to confirm;
6. Press the P/ ESC button (B7) to exit the menu.

Setting water hardness

The operating period can be extended if required, making desca-
18