Table of Contents
Advertisement
FUNCTION
CODE
OUTLINE
FUNCTION
CODE
OUTLINE
FUNCTION
CODE
OUTLINE
7-2. Control Codes Used for Line Spacing
FUNCTION
CODE
OUTLINE
FUNCTION
CODE
OUTLINE
FUNCTION
CODE
OUTLINE
Cancel highlighted print mode
<ESC> "5"
(1B)
(35)
H
H
Cancels highlighted print mode.
Select inverted print mode
<SI>
(0F)
H
Data following this code is printed out in inverted characters.
This code is valid only when input at the beginning of a line,
thus, normal and inverted characters cannot be mixed in on
the same line.
Cancel inverted print mode
<DC2>
(12)
H
Cancels the inverted character mode. This code is valid only
when input at the beginning of a line.
Line feed
<LF>
(0A)
H
Data in the line buffer is printed out and one line is fed. If data
does not exist before this code is received, the printer only
feeds one line.
Line feed (Same as LF)
<CR>
(0D)
H
Functions the same as an LF code.
When DIP SW 1-3 is set to ON, this code becomes invalid.
Set 1/6-inch line feed
<ESC> "z" "1" or <ESC> "z" <1>
(1B)
(7A)
(31)
H
H
Line feed is set at 1/6-inch after this code is received.
or (1B)
(7A)
H
H
– 36 –
(01)
H
H
Hide quick links:
Advertisement
Table of Contents
