5-2. Printing Format
Prints one line in 7
32 columns (from the 5th to 36th columns)
Even if the setting for the paper width is changed by the DIP switch, the 32-
column format will not change.
5-3. Data format
<GS> <data> <LF>
5-4. Other
The FEED and ON LINE switches will not operate normally during validation
printing.
When the printer receives an immediate execution command for peripheral
units during validation printing, it executes the command when the validation
print mode is canceled.
Modes in effect before the validation printing (such as emphasized printing,
inverted printing, expanded printing, and underlining) are invalid during
validation printing. But these become valid again after validation printing.
Data received before a <GS> code is printed out when the printer receives the
<GS> code.
Paper sensor
position
9 font normal printing.
Print area
52.8
100
Min. 120
Fig. 5-3 Print area
– 27 –
Approx.
17
: m m