Control Codes Used For Character Setting - Star Micronics SP300 Series Programmer's Manual

7-1. Control Codes Used for Character Setting

FUNCTION
CODE
DEFINITION RANGE
OUTLINE
FUNCTION
CODE
OUTLINE
NOTE
FUNCTION
CODE
OUTLINE
NOTE
Select international character set
<ESC> "R" n
(1B) (52)H n
H
(00) n (08)
H
Select the international character set corresponding to the
value set for n.
n =(00) : U.S.A.
H
(01) : France
H
(02) : Germany
H
The default international characters can also be set with DIP
switches, however, setting by control code takes priority over
setting by DIP switches.
Refer to chapter 11-5 "Code Table"
Select IBM character set #2
<ESC> "6"
(1B) (36)
H H
Selects IBM character set #2.
This code is only valid when the character code table set by
DIP switches 2-1 and 2-2 is IBM character set #1 or #2.
Select IBM character set #1
<ESC> "7"
(1B) (37)
H H
Selects IBM character set #1.
This code is only valid when the character code table set by
DIP switches 2-1 and 2-2 is IBM character set #1 or #2.
H
(03) : England
H
(04) : Denmark
H
(05) : Sweden
H
– 32 –
(06) : Italy
H
(07) : Spain
H
(08) : Japan
H