Table of Contents
Advertisement
Memory Features
The WristOx collects and stores up to 33 hours of SpO
and pulse rate information with a 4-
2
second sample rate. When the memory fills up, the unit begins overwriting the oldest data
with the new data. Each time the WristOx is turned on, data are automatically collected in
memory.
NOTE:
Only recording sessions longer than one minute are stored.
Each time the WristOx is turned on, the current oximeter time and date (if the clock is set
properly) are stored in memory to allow quick differentiation of recording sessions. Patient
SpO
and pulse rate are stored every four seconds (default), or every one or two seconds if
2
programmed using nVISION software (version 5.0 or greater). The oxygen saturation values
are stored in 1% increments in the range of 0 to 100%.
29
Advertisement
Table of Contents
