Table of Contents
Advertisement
Sensor Activation Mode
Sensor Activation mode can be selected with nVISION software (version 5.0 or greater). In
this mode, connecting and disconnecting the sensor from the WristOx functions like an ON/
OFF switch (whether or not a finger is in the sensor). In Sensor Activation mode, the
WristOx shuts off automatically after 30 minutes of no use or invalid pulse detection.
NOTE:
When the WristOx shuts off automatically after 30 minutes, the sensor
must be unplugged and then reattached in order to turn on the WristOx.
Programmed Mode
In Programmed mode, the WristOx turns on and off at user-defined intervals that are
selected using nVISION software (version 5.0 or greater). Programmed mode allows users to
select up to three start and stop times and dates. The sensor must be connected in order for
Programmed mode to function.
27
Advertisement
Table of Contents
