System Features - Respironics REMstar Plus with C-Flex User Manual

Communications
Connector
DC Inlet
Filter and
Filter Cap
AC Inlet ............................... Connect/disconnect the AC power cord here.
Air Outlet ............................ Connect the flexible tubing here.
Communications
Connector ............................ For clinical use with the Encore
DC Inlet ............................... Connect the optional DC power cord here.
Display Screen ..................... All system settings, total operating time, and therapy hours will appear
Filter Cap & Filters ............ The foam filter screens out normal household dust and pollens. The
Humidifier Button .............. This button turns the REMstar heated humidifier on/off and allows the
Medical Product Note ......... For ease at airport security stations, there is a note on the bottom of the
Pressure Start / Stop
Button ................................ This button starts/stops the airflow.
Ramp Button ....................... This button starts the ramp cycle or accesses the REMstar Plus with
User Buttons ........................ These buttons can be used to change some of the system settings.
Humidifier
Button
Ramp
Medical
Button
Equipment
Note (on bottom)
AC Inlet
IEC 950 approved device. Connect the communications cable here.
here. Displays the pressure and elevation settings.
optional, ultra-fine filter is also included for more complete filtration of
very fine particles. The filter cap is designed to reduce the noise from
the REMstar Plus with C-Flex.
heat setting to be adjusted. The humidifier is an optional accessory that
may be purchased separately.
REMstar Plus with C-Flex stating that it is medical equipment. It may
help if you also take this manual with you when you travel.
C-Flex settings.

System Features

Air Outlet
User Buttons
®
Pro Data Management Software or an
REMstar Plus with C-Flex User Manual
Display
Screen
Pressure
Start/Stop Button
7