Connecting the WristOx to a Computer
To use the WristOx with nVISION software (version 5.0 or greater), a WristOx-compatible
computer cable (Model 1019443) is needed. This cable, available with the WristOx accessory
package, can be connected to a computer for data downloading and editing with
nVISION software. Use the instructions below to connect the WristOx to a computer:
1.
Connect the cable to the appropriate COM port on the computer.
2.
Plug the cable to the top of the WristOx.
3.
Wait until CP appears in the WristOx display. The WristOx is now ready for use with
nVISION software.
28