Setting A Daily Measurement Timer - Larson Davis Spartan 730 Reference Manual

6.2.2 Setting a Daily Measurement Timer

730 Dosimeter Reference Manual Rev B
The Spartan 730 enables you to set one or more time periods per day
(daily timers) during which the dosimeter will automatically power on,
take a scheduled measurement, and power off. You can schedule up to
3 daily noise measurements using the Daily Timer.
You can also set a timer from the LD Atlas app or G4 LD Utility. This
section shows you how to set a Daily Measurement Timer on the
dosimeter.
In this section, use
option. Use
Step 1. Press and hold
Step 2. Highlight, then
Step 3. From the Settings menu, highlight, then
Timers menu.
Step 4. Highlight, then
screen.
Step 5. On the Timer Mode screen, choose Daily Timer to return to the Timers
menu.
Step 6. Highlight, then
Start Date screen.
Step 7. Set a value for the timer Start Date in yyyy-mm-dd format, to return to
the Timers menu.
Using the Dosimeter Buttons to Set the Start Date
• Press the
• Press
Step 8. Quick press power
Setting Up a Measurement Timer
up down
or
select
to set the option.
select to open the dosimeter Menu.
Settings to enter the Settings menu.
select
Mode from the list. This opens the Timer Mode
select
select Start Date from the Timers menu. This opens the
up or down button to change the digit.
select to set the digit and progress to the right.
to step back to the left.
on the dosimeter to highlight an
select Timers. This opens the
58