Vehicle - HAKO Scrubmaster B310 R/TB 1020 Instruction Manual

Maintenance and Service
It is essential to pay attention
to the information in Chapter
"Safety Information" before
completing any service or
maintenance work!
By adhering to the maintenance work
recommended by us, you can be sure
that the vehicle is always ready to be
put into operation.
Maintenance and repair work neces-
sary on a daily and weekly basis can be
carried out by a driver trained to com-
plete the work, all other Hako system
maintenance may only be completed by
personnel who are correspondingly
qualified and trained. In case of doubt,
please contact your nearest Hako ser-
vice center or authorized Hako dealer.
Failure to observe this annuls any rights
to claims under the terms of guarantee
in respect of resulting damage or con-
sequential damage.
Always specify the serial number, indi-
cated on the rating plate, when making
any inquiries and orders for spare parts,
refer to Section 1.7.
Hako system maintenance:
• ensures the Hako working vehicle is
always ready for operation (preven-
tive maintenance),
• minimizes operating costs, mainte-
nance and repair costs,
• ensures the vehicle has a long ser-
vice life.
The Hako system maintenance de-
scribes the specific technical work nec-
essary for the individual modules and
defines the intervals for the mainte-
nance tasks. Individual parts which
must be changed during maintenance
tasks are defined and stipulated in
spare parts kits.
Work to be carried out by the customer
according to the service and mainte-
nance instructions in the operating
manual (daily and weekly). Operating
personnel are given the necessary in-
struction by specialists when the vehi-
cle is delivered.
(Every 250 operating hours)
Must be completed by a skilled techni-
cian in an authorized Hako service cen-
ter according to the vehicle-specific
system maintenance with a spare parts
kit.
(Every 500 operating hours)
Must be completed by a skilled techni-
cian in an authorized Hako service cen-
ter according to the vehicle-specific
system maintenance with a spare parts
kit.
(Every 1000 operating hours
Safety check)
Must be completed by a skilled techni-
cian in an authorized Hako service cen-
ter according to the vehicle-specific
system maintenance with a spare parts
kit. All legally prescribed safety-relevant
tests for Germany must be completed in
accordance with UVV, BGV, TÜV and
VDE requirements.
67