Maintenance and Service
Check the knurled nuts on the squeegee; change as necessary
Grease the joints and connection rods of the waste water vacuuming system
Adjust the support wheels on the squeegee
Check the vacuum at the suction hose; clear any defects
Check the electrical safety functions:
parking brake, recovery tank float switch
Check the vehicle's condition visually:
color, corrosion and presence of all signs and labels
Check the vehicle is clean; clean it, if necessary
Test drive and test all function and safety-relevant components, including brake tests
Produce test reports in accordance with German UVV, BGV, TÜV and VDE requirements
Inspection label
Logbook
On request against separate account: driver training
74