Advertisement
Quick Links
Hako Scrubmaster B30CL
1. Disconnect mains plug of the charger from outlet and fasten to holder 1.
2. Fill the clear water tank after folding up the opening 2. Control the filling level
by the filling level indication 3.
3. Switch the machine on by the key switch 4. All aggregates are in standby.
4. Use lever
5
to lower squeegee 14.
5. Use pedal
6
6. Adjust driving direction with switch
7. Pull the bail
switches on.
8. Use switch
9
Qualified persons only are authorised to operate the machine!
The machine is not designed for coarse material! Floor area sweeping before!
Use only cleaning agents suitable for automatic machines ( low-foaming )!
Please pay attention to the informations in the instruction manua!
OPERATION:
to lower brush head.
7
of the bailsystem. Brush head drive and suction turbine
to adjust the water ( if necessary )
NOTE! Make sure that pad / brush is installed!!!
10
and speed with potentiometer
11.
Advertisement
Related Manuals for HAKO Scrubmaster B30CL
Summary of Contents for HAKO Scrubmaster B30CL
- Page 1 Hako Scrubmaster B30CL OPERATION: 1. Disconnect mains plug of the charger from outlet and fasten to holder 1. 2. Fill the clear water tank after folding up the opening 2. Control the filling level by the filling level indication 3.
- Page 2 Hako Scrubmaster B30CL MAINTENANCE AND CARE: Daily maintenance: Weekly maintenance: Empty clear water tank by opening the Check and clean brush head / fresh water filter covering Check and sealing strip clean filter if required. Clean the machine from outside ...