Table of Contents
Advertisement
Operation
This button serves
to switch the solution feed on
and off when the brush head is lowered.
The solution quantity previously set re-
mains unaltered (last station memory).
42
The button serves
to increase the solution quantity
supplied to the brushes. The solution
quantity can be increased in seven
stages (see above). The selected stage
remains programmed (last station
memory) even if the vehicle is switched
off temporarily.
After pressing the
green Hako button, the most important
basic functions for standard cleaning
are automatically activated/deactivated
in the correct sequence of use: suction
turbine, brush rotation, solution feed
and lowering or raising the brushes and
squeegee. When the vehicle is ready
for use in accordance with require-
ments, it can be set into operation sim-
ply and quickly by pressing the Hako
button. When the Hako button has been
pressed, the green control lamp lights
up.
Advertisement
Table of Contents
