Advertisement
1. Before You Start
Package Contents
2 x TEW-740APBO
Ÿ
CD-ROM (User's Guide)
Ÿ
Quick Installation Guide
Ÿ
Proprietary PoE injectors
Ÿ
Power adapters (12 V DC, 1A)
Ÿ
Mounting Hardware
Ÿ
Grounding wires
Ÿ
Minimum Requirements
Computer with a network port and web browser
Ÿ
A network switch or router with an available network LAN port
Ÿ
Phillips screwdriver (Ground wire installation)
Ÿ
4 x RJ-45 network cables
Ÿ
Note:
It is recommended to use network cables without additional caps, molded caps, or boots with
the access points for cable fitment inside the enclosure.
Note:
The TEW-740APBO does not support IEEE 802.3at/af PoE standards. You must use the
proprietary Power over Ethernet injector that is supplied with the TEW-740APBO. The RJ-45
Ethernet cable between the passive PoE injector and access point can have a maximum length
of up to 60 m (197 ft.).
1
Advertisement
