Before You Start - TRENDnet TEW-WLC100 Quick Installation Manual

1. Before You Start

Package Contents
TEW-WLC100
Ÿ
Quick Installation Guide
Ÿ
CD-ROM (User's Guide)
Ÿ
Power adapter (12V DC, 1A)
Ÿ
Rack mount kit
Ÿ
Minimum Requirements
Computer with an Ethernet port and web browser
Ÿ
Network cable
Ÿ
Wireless Access point(s) (TEW-755AP, TEW-821DAP)
Ÿ
Optional Equipment
EIA standard 19" rack
Ÿ
Access Point Compatibility
Before you proceed, please ensure you are using one of the access point models in the list and
the firmware version of your access points has been upgraded accordingly to the versions
indicated in the list below. Please reset all access points to the factory default configuration.
Also, make sure your network is using a DHCP server to distribute IP addresses to the access
points. By default, TRENDnet access point models listed below will obtain an IP address
automatically through DHCP or otherwise default back to 192.168.10.100 / 255.255.255.0 if a
DHCP server is not available on your network. Each access point must be assigned a unique IP
address on the same network.
Access Point Model Description
TEW-755AP
TEW-821DAP
You can download the access point firmware from http://www.trendnet.com/support which
include instructions on how to upgrade the firmware.
N300 PoE Access Point
AC1200 Dual Band PoE Access Point
1
Firmware Version
1.02 or above
1.04 or above