TRENDnet TEW-740APBO2K Quick Installation Manual page 5

Hide thumbs Also See for TEW-740APBO2K:

Verify connectivity between the two access points before mounting.

Aside from the preconfigured WDS bridge settings, the TEW-740APBO access points will also be

configured with the following default settings:

TEW-740APBO #1

Mode: WDS Mode

IP Address: 192.168.10.50

Netmask (Subnet Mask): 255.255.255.0

IP Gateway (Default Gateway): 192.168.10.1

Primary DNS: 192.168.10.1

TEW-740APBO #2

Mode: WDS Mode

IP Address: 192.168.10.51

Netmask (Subnet Mask): 255.255.255.0

IP Gateway (Default Gateway): 192.168.10.1

Primary DNS: 192.168.10.1

1. Remove the cover of the access point by pushing and holding the tab in the vertical direction

upward (based on the access point orientation below) and pulling the cover in the two

locations noted below away from the access point.

Pull and hold tab