Ending A Connection; Online Help - Sierra Wireless AIRCARD 597E User Manual

Ending a Connection

To end a connection:
In the Mobile Broadband window, click Stop.
This ends your data connection, and also your GPS connection, if it is open.
Note:
The Stop button in the
may still be transferred.
If Enable Network Adapter (NDIS) (page 78) has not been selected and you exit
Sprint Connection Manager while a connection is in progress, a window opens
asking whether you want to disconnect the call. Click Yes to end the connection
and exit Sprint Connection Manager. (See "Exiting Sprint Connection Manager" on
page 58.)
If Enable Network Adapter (NDIS) has been selected, manually disconnecting will
leave the card disconnected. It will not reconnect until you remove and reinsert
the card.
If GO automatically when ready (page 78) has been selected, manually
disconnecting will leave the card disconnected. It will not reconnect until one of
the following occurs:
You make a connection through Sprint Connection Manager
A GPS fix is successfully acquired after you initiate Sprint Location Services
(page 53)
You restart Sprint Connection Manager

Online Help

Sprint Connection Manager includes extensive online help to provide operating
hints and step-by-step instructions for getting the most from your card.
With Sprint Connection Manager running, you can access online help in several
ways:
Press <F1> when Sprint Connection Manager is the active window.
From Sprint Connection Manager, select MENU > Help.
Right-click the system tray icon (
The help file has a table of contents and an index.
Section 3A: Your Card: The Basics (Windows)
GPS Receiver
window ends only your GPS connection; data
) and select Help.
63