Starting Sprint Connection Manager Automatically; Sprint Connection Manager Window - Sierra Wireless AIRCARD 597E User Manual

Starting Sprint Connection Manager Automatically

To set Sprint Connection Manager to start automatically whenever Windows starts:
From the General option in the "Settings" window (page 75), select
Launch when Windows starts.
Note: Changes to this setting apply only after you restart Windows.
Tip: You can also set the connection to launch automatically whenever
available. (See "GO automatically when ready" on page 78.) These settings
provide an "always-on" connection, as long as you have network coverage.

Sprint Connection Manager Window

If Sprint Location Services and the GPS Receiver window are not supported or not
enabled (page 81), then only the Mobile Broadband window is displayed:
If Sprint Location Services and the GPS Receiver window are supported and
enabled, then the GPS Receiver window is additionally shown below the Mobile
Broadband window:
Section 3A: Your Card: The Basics (Windows) 43