Sierra Wireless AIRCARD 597E User Manual page 87

Menu Item
Network
Mode:
1X Only
Roam Mode:
Sprint
Roam Mode:
Automatic
Roam Mode:
Roam Only
Roam Mode:
Roam Guard
Activation
Wizard
User Lock
Change
Auto Launch
Section 3C: Changing Sprint Connection Manager Settings (Windows)
Description
Attempt only a Sprint Vision (1X) connection (even when you
have Sprint Power Vision [1xEV-DO] coverage, which provides
faster data transmission speeds).
Note: When in an area that has only Sprint Power Vision (1xEV-DO)
coverage, you won't be able to connect to the network.
Disable roaming when you are not in the network coverage
area. You will be able to connect only when you are in the
network coverage area.
Allow roaming when you are not in the network coverage
area.
Note: Roaming rates may apply. Roam Guard (page 60) can remind
you of this.
Allow only roaming.
Note: Roaming rates may apply. Roam Guard (page 60) can remind
you of this. Sprint Location Services may not be available.
Display a warning message when you are about to establish a
data connection while roaming. For more information, see
"Roam Guard" on page 60.
Available only if Roam Mode is set to Automatic (page 79).
Note: If you proceed with the data connection, roaming rates may
apply.
Used only when activating a card, or when changing your
card's phone number (page 32).
Change the security lock code of the card (page 67).
Optionally specify which application to automatically launch
when a connection is established.
See "Auto-launch upon Network Connection" on page 61.
79