Sierra Wireless AIRCARD 597E User Manual page 86

The following table describes the options:
Menu Item
Always show
Welcome
Screens
GO
automatically
when ready
Enable
Network
Adapter
(NDIS)
Network
Mode:
Automatic
Network
Mode:
1xEV-DO
Only
78 Section 3C: Changing Sprint Connection Manager Settings (Windows)
Description
Display a welcome screen upon a successful connection to the
network.
Automatically connect to the network after Sprint Connection
Manager starts, or whenever Sprint Connection Manager
loses the network connection.
To select GO automatically when ready, ensure that Enable
Network Adapter (NDIS) (below) is not selected.
Tip: You can also set Sprint Connection Manager to start
automatically (see "Launch when Windows starts" on page 76).
These settings provide an "always-on" connection, as long as you
have network coverage.
You can have a connection established automatically, without
having to run Sprint Connection Manager. Ensure that
GO automatically when ready is not selected, and select Enable
Network Adapter (NDIS) (below).
Make a connection automatically, without running
Sprint Connection Manager—simply by starting whatever
application you want to use (such as your Web browser or
email application).
To select Enable Network Adapter (NDIS), ensure that GO
automatically when ready (above) is not selected.
Note: Sprint Location Services are available only when
Sprint Connection Manager is running.
Attempt a Sprint Power Vision (1xEV-DO) connection and, if
not successful, attempt the slower Sprint Vision (1X)
connection.
Attempt only a Sprint Power Vision (1xEV-DO) connection.
Note: Sprint Location Services may not be supported. When in an
area that has only Sprint Vision (1X) coverage, you won't be able to
connect to the network.