Non-Preactivated Card: One Touch Activation; Non-Preactivated Card: Activation Wizard - Sierra Wireless AIRCARD 597E User Manual

Non-preactivated Card: One Touch Activation

If the "One Touch Activation" window appears, click Yes to indicate that you'd like
to have the network autoprogram your card.
Sprint Connection Manager will display "Updating User Profile."
If One Touch Activation is successful, Sprint Connection Manager will then display
"Disconnected," after which you are ready to connect to the network. (Click the
GO button in Sprint Connection Manager.) To learn about using the software, see
"Using the Card on a Windows Computer" on page 39.
If One Touch Activation was not successful, a message window is displayed. To
activate your card, use the Activation Wizard (see the next section).

Non-preactivated Card: Activation Wizard

If your card is not preactivated, please see the Getting Started guide included with
your card.
Note: If you successfully activated your card through the "One Touch Activation"
window (page 32), skip these steps and go directly to "Using the Card on a
Windows Computer" on page 39.
The Activation Wizard will guide you through the activation process.
To set up your account, you will be contacting Sprint.
Before you call Sprint, have these things ready:
A phone
Your card
The city and state where the card will be primarily used
A pen and paper to write down your account information. Your package
includes a printed Getting Started guide, where you can record this
information.
32 Section 2D: Setting Up Service (Windows)