Infocenter Display - Toro Groundsmaster 4300-D Service Manual

InfoCenter Display

Groundsmaster ® 4300-D
16226SL Rev C
g190807
1.

InfoCenter display

The InfoCenter display used on your Groundsmaster is a LCD device that is
located on the control arm
the operator during the operation of the machine, provides the electrical system
diagnostic assistance for the technicians, and allows inputs for the adjustable
machine settings (Figure
The power for the InfoCenter is available when the main power relay is energized
(key switch in the R
UN
machine TEC, Yanmar engine ECU, InfoCenter, and cutting deck motors provide
necessary machine communication for the InfoCenter operation.
Note: Icons that are used on the InfoCenter display are identified in the Traction
Unit Operator's Manual.
Figure 128
2. Control arm
(Figure 128). The InfoCenter provides information to
129).
or S position). A CAN-bus system involving the
TART
Page 5–7 Electrical System: InfoCenter Display