Safety And Instructional Decals; Raising The Rear Of The Machine - Toro Groundsmaster 4300-D Service Manual

Raising the Rear of the Machine

Safety and Instructional Decals

Groundsmaster ® 4300-D
16226SL Rev C
g186591
1. Rear wheel
2. Rear axle pivot bracket
1. Set the parking brake and block the 2 front wheels with chocks to prevent
the machine from moving.
2. Position the jack securely at the center of the rear axle under the axle pivot
bracket. Lift the rear of the machine off the ground.
3. Position the jack stands under the frame to support the machine
Numerous safety and instruction decals are affixed to the traction unit and
cutting units of your Groundsmaster. If any decal becomes illegible or damaged,
install a new decal. Decal part numbers are listed in your Parts Catalog. Order
replacement decals from Authorized Toro Distributor.
Figure 3
3. Jack stand location
Page 1–7
(Figure
Safety: Safety and Instructional Decals
3).