Operator Advisory Screen - Toro Groundsmaster 4300-D Service Manual

Operator Advisory Screen

Electrical System: InfoCenter Display
g187150
1. Fault indicator
2. Advisory qualifier
If the Toro Electronic Controller (TEC) inputs are not in the correct position to
allow certain machine operations, or are malfunctioning, the fault indicator will
illuminate and an advisory screen will appear on the InfoCenter display
134). Each advisory screen has 3 elements: the advisory number/code, advisory
description, and advisory qualifier.
An advisory qualifier denotes the condition(s) that triggered the advisory and
provides instruction on eliminating the advisory. An operator advisory may
involve one or more advisory qualifier. Typically, an advisory can be eliminated
by changing the position of the operator control(s) referenced by the advisory
qualifier. Once the first qualifier displayed is satisfied, any additional qualifiers
that remain to be satisfied will appear in the operator advisory screen individually.
Note: If a machine fault occurs during machine operation, the InfoCenter fault
indicator will blink to notify the operator. Accessing the fault log is described in
the Faults Screen (page
Figure 134
3. Advisory description
4. Advisory number/code
5–14).
Page 5–12
(Figure
Groundsmaster ® 4300-D
16226SL Rev C