Comtech EF Data LNA Series Installation And Operation Manual page 9

LNA Low Noise Amplifier Series
Preface
The LNA is designed for connection to a power system that has separate ground, line and neutral
conductors. The equipment is not designed for connection to power system that has no direct
connection to ground.
The LNA is shipped with a line inlet cable suitable for use in the country of operation. If it is
necessary to replace this cable, ensure the replacement has an equivalent specification. Examples
of acceptable ratings for the cable include HAR, BASEC and HOXXX-X. Examples of
acceptable connector ratings include VDE, NF-USE, UL, CSA, OVE, CEBEC, NEMKO,
DEMKO, BS1636A, BSI, SETI, IMQ, KEMA-KEUR and SEV.
International Symbols:
Symbol
~
Telecommunications Terminal Equipment Directive
In accordance with the Telecommunications Terminal Equipment Directive 91/263/EEC, this
equipment should not be directly connected to the Public Telecommunications Network.
Definition
Alternating Current
Fuse
vii
Symbol Definition
Protective Earth
Chassis Ground
Revision 0
MN/LNAS.IOM