Trouble Shooting - Cuisinart CH4DCU Instructions For Use Manual

Trouble Shooting

Motor doesn't start or blade doesn't rotate.
Check that plug is securely inserted into the mains.
Check that work bowl and lid are securely locked into place.
Ensure only one control switch is being pressed at a time.
Food is unevenly chopped.
Either you are chopping too much food at one time, or the pieces are too large. Try cutting food into
smaller pieces of an even size and processing a smaller amount per batch.
Food is chopped too fi ne or is watery.
The food has been over-processed. Use brief pulses or process for a shorter period of time.
Food collects on lid or sides of work bowl.
You may be processing too much food. Turn the appliance off. When blade stops moving remove lid and
clean work bowl and lid with spatula.
Food gets stuck on blade.
You may be processing too much food. Turn the appliance off. When blade stops moving, carefully remove
blade. Remove food from blade and work bowl using a spatula and start again.
18