Configure The Module - Allen-Bradley 1732E ArmorBlock Series User Information

14 1732E ArmorBlock 2-Port EtherNet/IP Modules with QuickConnect
Auxiliary Power is based on a 4-pin and 5-pin connector system and is used to provide 24V
DC power to I/O modules and other devices. Running separate power to these devices is
most typically used for I/O devices with output connections to prevent power supply
interruption due to switching of outputs. However, some devices require separate auxiliary
power to power them regardless of the presence of outputs.
Depending on the devices used, it may be possible to provide power through only one pair
of the four available pins, and in this case the other available pair may be used for single
channel E-stop through the use of special E-stop drop or power T-ports and shorting
plugs. Allen-Bradley E-stop T-ports and shorting plugs are red in color for easy
identification.

Configure the Module

Refer to the illustration for configuration operations.
Configure Operations
EtherNet/IP D-code
M12 connector
Node address
switches
M12 style
I/O connectors
Mini-style
auxiliary
power in
Publication 1732E-IN010C-EN-E - June 2013
LINK 1 LINK 2
PORT 1 PORT 2
MOD
NET
AUX POWER
1732E-16CFGM12QCR shown
EtherNet/IP D-code
M12 connector
M12 style
I/O connectors
Mini-style
auxiliary power out
45761