Related Manuals for Allen-Bradley 1732E-IT4IM12R
Summary of Contents for Allen-Bradley 1732E-IT4IM12R
-
Page 1: Table Of Contents
Installation Instructions 1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules Catalog Numbers 1732E-IT4IM12R, 1732E-IR4IM12R Table of Contents Topic Page Important User Information Environment and Enclosure Preventing Electrostatic Discharge Overview Catalog Number Explanation Install the Module Set the Network Address... -
Page 2: Important User Information
2 1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules Important User Information Solid-state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (Publication SGI-1.1 available from your local Rockwell Automation sales office or online at http://www.rockwellautomation.com/literature/) describes some important differences between solid-state equipment and hard-wired electromechanical devices. -
Page 3: Environment And Enclosure
1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules Environment and Enclosure ATTENTION: This equipment is intended for use in overvoltage Category II applications (as defined in IEC 60664-1), at altitudes up to 2000 m (6562 ft) without derating. This equipment is considered Group 1, Class A industrial equipment according to IEC/CISPR 11. -
Page 4: Overview
• download a free electronic version from the internet: http://rockwellautomation.com/literature • purchase a printed manual by contacting your local Allen-Bradley distributor or Rockwell Automation representative Overview The EtherNet/IP ArmorBlock is a 24V DC I/O module that communicates via EtherNet/IP. The sealed IP65, IP67 and IP69K housing of these modules requires no enclosure. - Page 5 1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules Module Identification Function earth EtherNet/IP D-code EtherNet/IP D-code M12 connector M12 connector Link 1 status indicator Link 2 status indicator Module status indicator Network status indicator Node address switches I/O status indicators M12 style...
-
Page 6: Catalog Number Explanation
871A-TS4CJC-DM or 871A-TR4CJC-DM (with embedded thermistor) Provides labelling for the terminal blocks to allow for easy identification and description. Recommended for use with the 1732E-IT4IM12R module. Catalog Number Explanation Refer to the table for a description of the module catalog numbers. - Page 7 1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules • adjust the switches on the front of the module. • use a Dynamic Host Configuration Protocol (DHCP) server, such as Rockwell Automation BootP/DHCP. • retrieve the IP address from nonvolatile memory. The I/O block reads the switches first to determine if the switches are set to a valid number.
-
Page 8: Mount The Module
8 1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules If DHCP is not enabled, the I/O block uses the IP address (along with other TCP configurable parameters) stored in nonvolatile memory. Network Address Switch value 001 The module IP address cannot be the same as the gateway address. If the address switches are set to 001, the module IP address becomes 192.168.1.1, which is the same as the default gateway address. - Page 9 1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules Module Dimensions 37 (1.46) 19.8 (0.78) 16.2 (0.64) 166.5 (6.56) 179 (7.05) 168.6 (6.64) (1.06) 43.3 (1.70) Measurements are in millimeters (inches) (1.26) (0.71) 45870 Publication 1732E-IN005B-EN-E - September 2012...
-
Page 10: Connect The I/O, Network And Auxiliary Cables To The Module
45768 Connect the I/O, Network and Auxiliary Cables to the Module The 1732E-IT4IM12R and 1732E-IR4IM12R modules have 5-pin micro-style M12 I/O connectors. We provide caps to cover the unused connectors on your module. Connect the quick-disconnect cord sets you selected for your module to the appropriate ports. - Page 11 1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules Micro-style M12 5-Pin Input Female Connector – 1732E-IR4IM12R (View into connector) Pin 1 No Connect Pin 2 A Pin 3 B Pin 4 C Pin 5 No Connect 45868 Ethernet Connector D-Code Micro Network Female Connector (View into connector 1)...
- Page 12 12 1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules Use two twisted pair CAT5E UTP or STP cables. IMPORTANT D-Code Wire Color Signal 8-way Modular M12 Pin RJ45 Pin White-orange White-green Orange Green ATTENTION: The device does not provide bonding or grounding terminal. Customer shall provide own bonding or grounding.
-
Page 13: Configure The Module
1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules Configure the Module Refer to the illustration for configuration operations. Configure Operations Functional ground EtherNet/IP D-code EtherNet/IP D-code M12 connector M12 connector Network address switches M12 style I/O connectors Power connector Power connector 45871 Refer to On-Machine Connectivity Catalog, publication M117-CA001, for... - Page 14 14 1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules Power Connectors Attach the micro-style 4-pin connector to the micro-style 4-pin receptacle as shown below. Micro-style 4-Pin Input Male Receptacle Male Input Female Output (View into receptacle) Pin 1 Auxiliary power+ Pin 2 Module power+...
-
Page 15: Interpret Led Indicators
1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules Interpret LED Indicators This module has the following indicators: • Network, Module, and Link status indicators for EtherNet/IP • Auxiliary power status indicator • Individual I/O status indicators for inputs Status Indicators Link 1 status indicator Link 2 status indicator... - Page 16 16 1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules Indicator Status for the Modules Indicator Status Description Module status No power applied to the device. Flashing red/green The module is performing POST (Power-On Self Test), which completes within 30 s. Green Device operating normally.
-
Page 17: Specifications
1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules Indicator Status for the Modules Indicator Status Description I/O status The input channel is inactive, can be calibrated. Flashing Green Channel is calibrating. Green Normal operation, inputs being scanned. Flashing Yellow Thermistor fault. - Page 18 1 – on power ports 1 – on communication ports Use this Conductor Category information for planning conductor routing. Refer to publication 1770-4.1, Industrial Automation Wiring and Grounding Guidelines. Input Specifications – 1732E-IT4IM12R Attributes Value Number of inputs 4, isolated...
- Page 19 1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules Input Specifications – 1732E-IT4IM12R Attributes Value Thermocouple types Type Material Temperature Voltage Range °C (°F) Range (mV) Pt /30% Rh vs. Pt/5% Rh 40…1820 0…13.820 (104…3308) W/5% Re vs. W/26% Re 0…2320...
- Page 20 20 1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules Input Specifications – 1732E-IT4IM12R Attributes Value Common mode 120 dB @ 50/60 Hz rejection rate Normal mode rejection 100 dB @ 50/60 Hz rate Sample Rate Filters 50 Hz...
- Page 21 1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules Input Specifications – 1732E-IR4IM12R Attributes Value RTD type Temperature Voltage Range Input range Range (°C) 100 Pt 385 0…390.48 -200…850 °C 0…156.25 mV 200 Pt 385 0…781 -200…850 °C 0…312.5 mV 100 ...
- Page 22 22 1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules Environmental Specifications Attribute Value Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock): -20…60 °C (-4…140 °F) Temperature, IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),...
- Page 23 1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules Certifications Certification (when Value product is marked) c-UR-us UL Recognized Component Industrial Control Equipment, certified for US and Canada. See UL File E322657. European Union 2004/108/EC EMC Directive, compliant with: EN 61326-1;...
- Page 24 RA-DU002, available at http://www.rockwellautomation.com/literature/. Allen-Bradley, Rockwell Automation, ArmorBlock, and TechConnect are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies. Publication 1732E-IN005B-EN-E - September 2012 Supersedes Publication 1732E-IN005A-EN-E - July 2012 Copyright ©...