Table of Contents
Advertisement
Chapter: BIOS Settings
4 BIOS Settings
4.1 Remarks for Setup Use
In a setup page, standard values for its setup entries can be loaded. Fail-safe defaults are loaded with F6
and optimized defaults are loaded with F7. These standard values are independent of the fact that a board
has successfully booted with a setup setting before.
This is different if these defaults are called from the Top Menu. Once a setup setting was saved, which
subsequently leads to a successful boot process, those values are loaded as default for all setup items
afterwards.
See also the chapters "Load Fail-Safe Defaults" (5.10) and "Load Optimized Defaults" (5.11).
N
OTE
BIOS features and setup options are subject to change without notice. The settings displayed in the
screenshots on the following pages are meant to be examples only. They do not represent the
recommended settings or the default settings. Determination of the appropriate settings is dependent upon
the particular application scenario in which the board is used.
4.2 Top Level Menu
► Standard CMOS Features
► Advanced BIOS Features
► Advanced Chipset Features
► Integrated Peripherals
► Power Management Setup
► PnP/PCI Configurations
► PC Health Status
Esc : Quit
F10 : Save & Exit Setup
The sign „►" in front of an item means that there is a sub menu.
The „x" sign in front of an item means, that the item is disabled but can be enabled by changing or selecting
some other item (usually somewhere above the disabled item on the same screen).
Use the arrow buttons to navigate from one item to another. For selecting an item press Enter which will
open either a sub menu or a dialog screen.
page 42
Phoenix – AwardBIOS CMOS Setup Utility
↑ ↓ → ←
"brief description of selected item"
► Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Password
Save & Exit Setup
Exit Without Saving
: Select Item
Beckhoff New Automation Technology CB2050
Remarks for Setup Use
Advertisement
Table of Contents
